The function of a Distributed Antenna System is to improve wireless signals in indoor and outdoor spaces. It can come in handy anywhere where there is an obstructed signal. It is important DAS design and installation is thought out to provide a better signal. There are some challenges that you’re likely to experience when designing and installing a DAS system and we’re going to highlight some of them.
Budget and Time Restraints
There are different factors that could determine the time frames and costs that it would take to design and develop the DAS system. It is important that you look at the frequency range that is required for the system. You can choose between Very High Frequency, Ultra High Frequency, or 800 MHZ public safety. The latter is seen as the easiest and most cost-effective to construct. No matter the option you go for, there will always be cost considerations to have in mind.
This issue affects the devices that are within the DAS coverage zone. It could be that it is being serviced by a microcell tower that is far away. The DAS will have to work overtime in order to provide communication for mobile devices. This could create interference and performance issues with the DAS system.
The solution would be to design and install the DAS system with this challenge in mind. The contractor should take into consideration how much macro signal bleeding occurs in a venue or a building. The DAS system should be powerful enough to ensure that all mobile devices are covered.
Challenge with Removing Certain Interference
It is important that all potential interferences are taken care of before the installation of the DAS. The interferences could be fortified construction, noise, surrounding buildings. Some interferences can be managed easily while some will take a lot more work to be handled. The goal of the installation is to work around the interference as there is no way you can remove a building which is acting as an obstruction. The only practical solution to this challenge is to ensure that all possible interferences are addressed during the design and installation process. The use of automatic detection and mitigation can come in handy if there are some interferences that can’t be easily discovered.
Look at the Future
The evolution of technology means that mobile communication will play a significant role in the future. That is why it is important to think about the future when designing a DAS system. The DAS should be robust enough to accommodate changes in the future. The growth of the organization or building should be factored in mind when coming up with the design. Expansion will mean more mobile traffic which could lead to inefficiencies with the system. It is crucial that the right steps are taken to ensure that future traffic is taken into consideration when designing and installing the DAS. For more information on DAS design and installation, you can check out https://boostpoorsignal.com/distributed-antenna-system-installation-companies/
Tampa, FL 33625
Find us on social media: